Global Educational Network for Satellite OperationsThe Global Educational Network for Satellite Operations (GENSO)[1][2] was a worldwide network of ground stations and spacecraft which were able to interact via a software standard. The GENSO aimed to increase the return from educational space missions and changed the way that these missions were managed, dramatically increasing the level of access to orbital educational spacecraft.[3] History In November 2007, a kickoff meeting was held at the CubeSat workshop.[4][5][6][7] This short presentation (at Aalborg University in Denmark) to the rest of the GENSO groups described work at Cal Poly for the project. This workshop kicked off the Alpha Test phase of the project. The entire project was successfully demoed in front of a live audience (us). The Mission Control Client booked downlink sessions with the Ground Station Server, and the Ground Station Server controlled the radio and rotors at the AAU ground station (across the building). The running Authentication Server authenticated people and registered satellites on the network. In February 2009, the ROBUSTA[8] project joined the GENSO initiative. ROBUSTA is the first French university CubeSat. The objective of the payload experiment is to measure the radiation induced degradation of electronic devices. Flight data will be compared to the results of a novel prediction method taking into account the Enhanced Low Dose Rate Sensitivity. The second interesting point of this project is that it's a real educational project. Although the system hasn't yet grown to the "hundreds" of ground stations identified in Alexandru Munteanu's Thesis from 2009,[9] testing and integration continue to proceed. The GENSO project initiated under the guidance of the International Space Education Board (ISEB) has many existing capabilities and is accumulating the interest of large groups inside and outside of the United States. However, it is still lacking a fully equipped ground station that can complement its capabilities. Since 2011, a great deal of work has been done on Release 1E of GENSO to help make it more user friendly and reliable for the Amateur Radio[10] community. Ground stations like the one at COSMIAC were running 24/7 downloading data for educational satellites such as the University of Michigan RAX-2 spacecraft. In 2014 the project was described by NASA as "currently on hold, with little expectation of resuming progress".[11] As of 2025 the project is cancelled.[12] How GENSO workedThe GENSO system was a software networking standard which allowed a user to communicate with a spacecraft by using a remote ground station which has a clear view of the spacecraft. Communications between the client computer (a mission controlcomputer) and the ground station server were conducted across the Internet.[13] There were three major components to the GENSO system :
There were also three main components that the GENSO system remotely controlled:
The GENSO software was written in Java. GENSO was developed and maintained under the auspices of the European Space Agency (ESA). List of membersSource:[14] See alsoNotes and references
External links
|
Portal di Ensiklopedia Dunia
